Underground Dog Fences > Innotek Underground Dog Fences > Innotek Standard Contain and Train

Innotek Standard Contain and Train Underground Dog Fence

This Dog Fence Qualifies for FREE SHIPPING!

Keep your dog contained within your yard and have the option of remote training all in one simple to use dog fence. The electronic dog fence portion will keep your pet safe within your desired area and the remote training module can keep them from digging in flowerbeds or getting in the trash. The hand held transmitter can control your dog up to 150 yards away.

The Innotek Standard Contain and Train Underground Dog Fence kit includes everything you need to contain one dog in a yard up to 1/2 Acre. With additional wire and flags and dog fence collars the Innotek Standard Contain and Train Dog Fence can enclose yards up to 5 acres in size and contain an unlimited number of pets. The Standard Contain and Train Pet Fence is a patented combination of dog fence and a remote training system.

A hand-held remote training transmitter provides four correction levels. The Standard Contain and Train operates in three modes: contain only, train only, and combination training and dog containment. The training transmitter provides a full 150 yards of range and can be used away from the dog containment area. Innotek Contain and Train Product Specifications

Cut Your Dog Fence Installation Time in HALF & Avoid The Back Breaking Task of Burying Wire. Use Our "Dog Fence Staples" to Install Your Underground Dog Fence - Above Ground!
Learn About Above Ground Dog Fence Installation

If your yard is larger than 1/2 acre or if you have more than one pet, all you need is more wire and flags and an additional collar for each pet. See our Innotek Standard Contain and Train Dog Fence Accessories page to order any additional items you may need for this dog fence.

Use this Wire Guide to determine how much wire you need to enclose your yard. These figures are estimates, based on typical layouts. You may need more wire if you're doing interior loops to boundary off gardens, swimming pools or other protected areas. We offer wire in on either 500 foot or 1,000 foot spools. 

To Cover This Size Area You Need This Amount of Wire
Up to 1/2 Acre 500 Feet (Included in This Kit)
1 Acre 1000 Feet
2 - 3 Acres 1500 Feet
4 - 5 Acres 2000 Feet

For larger areas, use the following formula: Multiply the total acreage by 43,560- i.e. 10 acres x 43,560 = 435,600 Find the square root of the above number - square root of 435,600 = 660 (this is the length of each side of a 10 acre area that is square in shape. Even if your area is not square, if you multiply this number by four, this is the approximate length of the four sides of a 10 acre area.) Therefore, one would need approximately 2,640 feet of wire to enclose the perimeter of a 10 acre area. You will need additional wire to run from the transmitter to the perimeter and/or for any interior loops, etc.