The Pet Fence Wire Break Locator makes finding breaks quick and easy. Often times, it is not possible to tell where your wire is broken unless you have the wire break locator.
It's not uncommon that you would need to dig up all your wire to find it. The Wire Break Locator will help you troubleshoot your system if there is a wire break indication on the fence transmitter or if the receiver collar is not functioning on the containment system but works during the short loop test.
Our Pet Fence Wire Break Detector can be used for any brand of underground pet fence to find wire breaks. This new and improved system replaces RFA-50.
The wire break locator is not returnable unless it is defective. All returned wire break detectors will be tested for proper operation. We will replace defective wire locators at no charge.
Showing reviews 1-10 of 52 | Next
Posted by Jonathan A. on Oct 27th 2014
It took a little while to figure it out but after I knew what I was doing it took less than 10 minutes to locate the break and fix it. Service man who came after 'Hurricane Sandy replaced the wire too close to the neighbors and they unknowingly planted a tree right on top of it ! My wire break locator was much cheaper than the service man, just as fast, and I still have it if trouble arises again.
Posted by Angie on Sep 3rd 2014
This is the best device. It works perfectly with the radio that
is included. If you have the radio fence you NEED this break
finder. It usually takes my husband hours to find the break,
but with the finder it only took him 45 minutes from start to finish. We have about 3 1/2 acres of fence. He usually knows
where to start looking. We are extremely pleased.
Posted by Cam Cammara on Jul 9th 2014
I installed a radio fence above ground. It worked very well. I had cut the wire a couple of times with the lawn mower and was able to repair the break with no problem. This break appeared to be caused by accidental cut made by a shovel or how in the middle of a run of the fence. I purched the product to locate the break. The product installed easlily and the instructions were easy to follow and I was able to find the break very quickly. I had read several reviews and was conserned about the quality of the radio receiver. Although a the low end of the AM band had inference from a local radio station, the receiver was able to pick up a very loud tone from the transmitter. I am very pleased with the performance of the product and recommend the product.
Posted by Jeff on Jul 3rd 2014
The wire break detector kit did help me find the location of our buried perimeter fence. However, the radio that is provided is worthless since it is not powerful enough and can't tune to a frequency that will provide the feedback that is required. I was able to use one of my own radio/cd/cassette players that runs on 4 "D" cell batteries. My radio emitted a clear tone when tuned to the low end of the am dial. Overall, the kit was worthwhile, since it included the transmitter, ground stakes, wire, gel caps, and the instructions on how to find breaks in the wire. I dug up the wire where it initially exits my home, cut the wire, connected the transmitter there and installed the ground stakes. The system worked as advertised while using my own radio which I hung from a rope so I could dangle it just above the ground without strain to my back. As far as detecting a break in our fence: the tone did change from pulsing to constant at one point in our 1000 foot "fence". We dug up about 20' of line and fine a break in the wire but it may be that we cut the wire while digging it up. I am skeptical that the wire was broken at this location previously because after we made the repair to the break the radio continued to give us a constant tone over this 20' stretch and yet gave us a pulse tone over all other portions of the fence. After fixing the broken wire we were still getting the error light and tone from our transmitter indicating that there was still a break in the wire somewhere. However, I switched the transmitter from the "B" setting to the "A" setting and adjusted the boundary width knob and the system then began to work.
Posted by Bill Lorentz on Jun 25th 2014
I have 1500 feet of underground wire, mostly in the woods around my property. It has been in for 14 years. It was impossible to find it without this detector. It took us about an hour to finally locate the break. This product worked as advertised. I only wish I could rent it out to others to recoup my cost. :)
Posted by Niki on Jun 2nd 2014
We purchased this and found several breaks in our wire. It worked just as it was supossed to. In my opinion it was better to purchase this rather than dig up the 2 acre dog fence to find the break. I would have a different review about the wire that came with the dog fence.
Posted by Mark Kreger on Apr 22nd 2014
For 16 years I've been an Radio Fence user with as many as 3 neighbor's yards in our containment area. Randomly every year or 2 having a break occur and using a radio to find it.
It usually takes 1-4 hours each time. This found the break in 20 min and in an area I would not have expected to find a break.
Posted by Unknown on Mar 31st 2014
FOUND BREAK IN 5 ACRE LOT IN ABOUT 20 MINUTES, RECOMMENDED
Posted by Wanda, Pennsylvania on Mar 27th 2014
Have used this break detector twice now and it really works great.
Posted by John on Oct 24th 2013
Works just like the instructions says it does, found six breaks in 1300 feet of wire. However the radio receiver that comes with it is very weak in picking up the signal. Like some other reviewers I used my own radio and it worked great.
Showing reviews 1-10 of 52 | Next